Filter
Top Products
~STALLATION
~STRUCTIONS
(continued)
HOW TO
COHVE~
THE RANGE FOR USE
WTH
1P 6AS OR
HATURAL
GAS (continued)
❑
~HvE~
~P
BURNER
VALVES
1. Turn all top
burners to
~W.
2. Remove all
four knobs.
3. With a small flat
\
\
\
W*.
blade screwdriver, turn
the valve set screws
clockwise to decrease
%
flame size, counterclockwise
\
i
//
to
increase flame size. Adjust
until the flame is about the same
1
height as the top of the burner.
4. Replace knobs.
5. Check for flame outage by opening and
closing the oven door several times. If the flame
goes out, increase the flame size.
46
❑
CHECK QUALITY OF
FLMES
The
combustion quality of burner flames needs
to be determined visually.
Eburner
flames look like
(A),
call for service.
Normal burner flames should look like
(B) or
(C),
depending on the type of gas you use.
With
LP
gas, some yellow tipping on outer cones
is normal.
(B) Yellow tips on
outer
cones—
Normal for
LP
gas