GE JVM141G Microwave Oven User Manual


 
Your Touch Control Mel
The touch control panel allows you to set the oven
controls electronically with the touch of a finger. It’s
designed to be easy to use and understand. With your
microwave oven, you have the option of using your
automatic cooking control pads for quick and easy
convenience cooking. Or you may make your own
programs to suit your individualized cooking style.
I
VvheIllbul%lginthehn
The display panel displays five 8’s, 18POWER and
all of the uven functions. After 15seconds, all lights
disappear and “RESET” appears in the upper portion.
Touch the CLEAR/OFF pad, set the CLOCK and
oven is ready for use.
If power is disrupted at anytime, the above sequence
recurs and you must reset CLOCK afkertouching
CLEAR/OFF.
“Error” Appearson Display
When using Temp Cook/Hold, you have entered
a temperature less than 9(PF. or more than 19!YF.
When using Auto Defiwst, the fd weight you
entered did not correspond with the code number
entered.
I
“Probe” Appeam on Display:
Probe has been forgotten when Auto Roast or Temp
Cook/Hold is being used.
I
. probe is ~ securely seated in oven wall receptacle.
1. Display I%neLDisplays time of day, time or
temperature during cmking functions, power level
being used, cooking mode and instructions.
2. Time Cook 1and Time Cook II. Microwave for a
preset amount of time using automatic power level 10
or change power level afler setting time. (Seepage 8.)
S Auto Start. Allows you to program your oven to
begin cooking at a preset time of day-up to a 12-hour
delay. (See page 8.)
4. Clock. Touch this pad to enter time of day or check
time of day while microwaving. To set clock, first
touch CLOCK pad and then enter time of day. For
example, if time is 1:30, touch number pads 1, 3, and
Oand “1:30” will appear on display. “START” will
flash on displw, directing you to touch START, thus
setting the clock. If you wish to reset or change time,
simply repeat above process.
& Clear/Off. When touched, it stops the oven and
erases all settings except time of day.
7. Auto Roast. Insert probe, touch this pad, and
desired number pad for code to slow-cook or
temperature cook meat with automatic preset
program. (See pages 12and 13.)
& Exhaust Fan. Press HI, LO or OFF for desired
fkn speed.
9. Time Defrost. Gentle thawing at automatic power
level 3, or change power level after entering time.
(See page 9.)
10. Tmp Cook/Hoid. Use the temperature probe to
cook by using a preset temperature. When internal food
temperature reaches 90’T?, oven shows temperature
until preset temperature is reached and holds
temperature for up to one hour. (Seepage 10.)
U. Min/Sec Timer. This feature uses no microwave
energy while it fimctions as both a kitchen timer or as
a holding period between defkost and time or
temperature cooking. (See page 11.)
12. Pbwerbvei. Touch this pad before entering
another power level number if you want to change
from automatic power level 10(High) for cooking or
power level 3 (Low) fir defrosting.
J3. Start. Touch this pad to begin any function.
14. Auto Defrost. Touch this pad, then code number
and fd weight. The oven automatically sets power
levels and defrosting time. (See page 14.)
15. Light. Touch desired pad to illuminate counter or
to turn on night light.
AUIUWATXCFM FEATURE
Cooking appliances installed under the oven might,
under some heavy usage conditions, cause temperatures
high enough to overheat some internal parts of the
microwave oven.
To prevent overheating fim taking place, the exhaust
fkn is designed to automatically turn on at low speed if
excessive temperatures occur. Should this happen,
the fan cannot be manually turned off, but it will
automatically turn off when the internal parts have
cooled. The fm may stay on up to approximately 30
minutes after the range and microwave oven controls
have been turned off.
S Number F&ds.Touch these pads to enter cook
time, fd temperature, puwer level, Auto Roast codes
or Auto Defrost codes and food weight.