Filter
Top Products
Internal temperature is the best test of doneness
Temp
Coowold
takes the guesswork out of cooking,
for manv foods.
because the oven automatically switches to “Hold”
.
Use Temp
Coo~old
to cook a variety of foods to
setting after reaching the preset food temperature
the desired finished food temperature. The
Mcro
and maintains that temperature until you touch the
Cook setting is recommended for batters, doughs,
CLEWOFF pad.
frozen foods and foods which are difficult to cook
NOTE: Oven
automaticrdly
switches to “HoId”
precisely with the probe.
when preset food temperature is reached.
The Temperature Probe
The temperature probe is a food thermometer that
gauges the
intemd temperature of your food. (Its
appearance may vary from picture shown.) The probe
must be used when using Temp
Coo~old
or Auto
Roast. To use the probe properly, follow directions in
the Automatic Roasting section.
How to Temp Cook a Rolled Beef Rib Roast to Medium
Step 1:
Insert temperature probe and attach probe
Step 6:
men
160°F.
is
reache~
the oven will sound
securely in oven wall. Close the door.
and display “Hold.” The oven will then hold the
Sten
2: Touch TEMP
COO~OLD
Dad.
temperature.
1
Ste~
3: Touch 1,6 and O for
160°F.
Step 4: Touch
PO~R
LE~L
pad.
n
POWER
EVEL
o
SA~
n
Step
7: Touch
the
CLEMOFF
pad to stop
U*
the cycle.
Touch 5 for medium power.
-
Step 8: Remove probe and food from the oven.
Step 5: Touch the
ST~T
pad. If internal
temperature of the roast is less than
90°F.,
display will show “COOL”; if temperature
is
90°F.
or above, display shows
temperature counting up.
Cooking Tips
●
Use a lower power level; foods will heat more
●
Cover foods loosely for moisture control and quick
evedy though requiring more time.
even heating.
●
Be sure frozen food has been completely defrosted
●
Insert
the
probe horizontally into the center meaty
before inserting probe. Probe may break off
if
used
area not touching bone or fat. Make sure the
hande
in frozen foods.
does not touch the food or top or sides of the oven.
Questions and
hswers
Q. Why did
“PRObE”
flash on the display?
Q. Can I leave my probe in the oven if it’s not
A.
“PRObE”
will flash if you don’t seat the cable
inserted in food?
,—
end of the probe securely into the receptacle in
A. No,
if it touches the oven wall, it may damage
the oven wall or if you touch the
~MP
the oven.
COO~OLD
pad and forget to use the probe.
19