Filter
Top Products
~
E~UST
~m
(continued)
To Remove Charcoal
Fflter
To Install Charcoal Filter
To remove the
To install a new
charcoal filter,
filter,
remove
disconnect power
plastic and other
at main fuse or
outer wrapping
circuit breaker
from the new
panel or
pull
filter. Insert filter
plug. Remove
into top opening
the top grille by
of oven as shown.
taking off 2 screws which hold it in place. Grasp filter
It will rest at an angle on 2 side support tabs and
and slide toward front of oven. It will slide right out.
in front of right rear tab. Replace grill and secure
with 2 screws.
GROW~G
~STRUC~ONS
This appliance must be grounded. In the event of an
electri~l short circuit, grounding reduces the risk of
electric shock by providing an escape
wire
for the
electric current.
~s
appliance is equipped with a
power cord having a
~ounding wire with a grounding
plug. The plug must be plugged into an outlet that is
properly installed and grounded.
Fig.
1)
w~NING–Improper
use.fthegr~undin~
plug
can
resuk
in a risk of electric shock.
Consult a
qualified
electrician
or service
technician if
the grounding
instructions are
not completely
understoo~
or
Ensure proper ground
Rg.
1
exiWs
before use
if doubt exists as to whether the appliance is
properly grounded.
mere
a standard 2-prong wall receptacle is
encountere~
it is your personal responsibility
and obligation to have it replaced with a properly
grounded 3-prong wall receptacle.
Do not under any circumstance cut or remove the
third @ound) prong from the power cord.
Do not use an adapter
plug
with this appliance.
Do not use an extension cord with this appliance.
32