GE JVM58 Microwave Oven User Manual


 
Time Cooking, or cooking your food according to a pre-
.
determined amount of time, is probably familiar to you from
conventional cooking. With your microwave oven, however.
you presetthe time and the 6venturns off automatically.
LJsirtg Your Oven to ?’irne Cook
Follow the cooking steps below to
help you learn to Time Cook
properly.
Step 1: Fill a cup 2/3 full of water
and 1 teaspoon of freeze dried
coffee. Usea cup that hasno metal
decoration. Placecup in oven and
close door.
Step 2: Touch TIME COOK. The
display shows :0. Signal light
aboveTIME COC)Kflashes.Power
Level 10 is automatically set in
oven, but does not appear in
display.
Step 3: Select your time. Touch
1,2 and Ofor a minute and 20sec-
onds. 1:20 and signal light above
TIME COOK appear on display. If
another Power Level is desired
touch POWfER LEVEL and the
number, although Power Level 10
(HIGH) is preferred for this cup of
coffee,
Step 4: Touch START. Time
counting down shows on display.
Step 5:
sounds
When time is up, oven
and
oven, light, and fan
shut off.
and
Q. I set myoven for the time called
for in the recipe but at the end of
the time allowed, my dish wasn’t
done. What happened?
A. Since house powor varies due
to time or location, many
Time
Cook
recipes give you atime range
to
prevent overcooking,Set the
oven
for min~mumtime, test the
food for doneness, and cook your
dish a little longer, if necessary,
Q. I want to cook my dish on a
PowerLevelother than HK3H,what
do 1need to do?
A. To change the Power Level,
touch the POWERLEVELpad after
entering desired cooking time,
Enterthe desired number and then
tc)uchSTART.
Q. Can I interrupt my Time Cook
function to check
tt’wfood?
A. Yes,To resumecooking, simply
close the door and touch START,
NOTE: Microwave power will not
come on until you are ready. You
must touch
STARTfor cooking to
begin.
CL I touched the number pads and
selected my power leveL When I
touched START,however,my oven
didn’t come oh. Whynot?
A. The TIME COOK pad must be
touched before setting the number
pads or else your oven will not be-
gin cooking.
Q. I tried to change Power Level
but the display changed back to
cooking time. Why’?
A, After touching Power Levelpad
you only have 4 seconds to enter
the number. Try setting controls
again.
10
--------———-——-