Filter
Top Products
17
TOOLS AND MATERIALS
YOU WILL NEED
• Saw
• Duct tape
• Measuring tape or scale
• Carpenter’s square
• Adjustable wrench or socket set (7/16″ socket and
ratchet)
• Drill and drill bit
• 1/4″ nut driver
• Sheet metal screws
• Pipe wrench
• Manual gas line shut-off valve
• Pipe joint sealant that resists action of LP gas
• Ductwork to suit the installation
For rigid connection:
• Shut-off valve
• Union
• Pipe fittings as required
For flexible connection where local codes permit:
• Flexible metal tubing (same 3/4″ or 1/2″ I.D. as gas
supply line)
22
7
⁄16″
(22
9
⁄16″ SS)
20
1
⁄2″
22″
29
7
⁄8″
(30″ SS)
2
3
⁄16″
(2
1
⁄4″ SS)
28
3
⁄4″
30″ COOKTOP (DIMENSIONS FOR REFERENCE ONLY)
Unit shown fully assembled.
Unit must be vented to the outside!
Installation Instructions
PREPARATION
HIGH ALTITUDE ORIFICE CONVERSION KIT
Use for cooktop operation at elevations above 5000 ft.
(1500m).
Specify kit for Natural Gas or LP Gas when ordering:
Natural Gas High Altitude
Orifice Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . .WB28X10114
LP High Altitude Orifice Conversion Kit . . . . . . . .WB28X10115
To order, please call our toll-free number:
National Parts Center . . . . . . . . . . . . . 800.626.2002