Filter
Top Products
Installation Instructions
16
CEILING INSTALLATION -
Continued
11. Insert the other chimney and keep it raised. Fix the
low connector to the connection box. Then fasten the
outlet duct onto the transition.
12. Bring the canopy together with the telescopic
structure, and fasten them together using 4 screws
(M8 x 16).
Then you can carry out the electrical connection
(consult Step 19 of
“WALL INSTALLATION”
instructions
on previous page).
13. Lower the chimney and fasten it on the sides to the
hood.
Ø 6 x 80
Ø 3.5 x 9.5
M8 x 16
14. Install the glass vapour catcher with 4 screws and
bushes, place the rubber tape between the canopy
metal edge and the glass (see drawing at last pages of
this manual)