Filter
Top Products
15
Surface Cleaning Features of Your Oven Control
FEATURES OF YOUR OVEN CONTROL
1. COOK TIME. Press this pad and then press the
HOUR and MIN. pads to set the amount of time
you want your food to cook. Turn the Oven
Temperature knob to the desired temperature. The
oven will shut off after the Cook Time has run out.
The COOK TIME indicator light will flash along
with the OVEN ON indicator light at the end of a
timed cooking operation.
2. TIMER ON/OFF. Press this pad to select the
timer feature. The timer does not control oven
operations. The timer can time up to 11 hours and
59 minutes.
To set the timer, first press the TIMER ON/OFF pad.
Press the HOUR and MIN. pads to change the time.
To cancel the timer, press the TIMER ON/OFF
pad until the display clears.
3. AUTOMATIC OVEN Light. This lights any
time the oven has been programmed for a timed
oven operation.
4. TIME DISPLAY. Shows the time of day and the
times set for the timer on automatic oven operations.
5. HOUR and MIN. pads. These pads allow you to
set times up to 11 hours and 59 minutes.
6. OVEN ON Light. Glows any time the oven is
heating. The light will flash at the end of a timed
oven operation, reminding you to turn the Oven
Temperature knob to OFF.
7. OVEN TEMPERATURE Knob. Turn this
knob to the temperature or function you want.
See the Baking, Roasting, Broiling and Self-
Cleaning sections.
8. PREHEATED Indicator Light. Glows when the
oven reaches your selected temperature.
9. AUTO SELF CLEAN Light. Glows when the
oven is in the Self-Clean cycle. After the Self-
Clean Cycle, the light will flash. Unlatch the door
and turn the Oven Temperature knob to OFF.
10. CLOCK. Press this pad before setting the clock.
To set the clock, first press the CLOCK pad.
Then press the HOUR and MIN. pads to change
the time of day.
11. START TIME. Press this pad and the HOUR and
MIN. pads to delay the starting of your oven up to
11 hours and 59 minutes.
If “F–and a number” flash in the display and
the oven control signals, this indicates function
error code. If function error code appears during
the self-cleaning function, check the oven door
latch—the latch handle may have been moved,
even if only slightly, from the latched position.
Make sure handle is to the right as far as it will go.
Turn the Oven Temperature knob to OFF. Allow
the oven to cool for one hour. If function error
code repeats, disconnect power to the range and
call for service.
PREHEATED
OVEN ON
200
BROIL
OFF
LATCH
DOOR
250
350
300
450
500
AUTO
SELF
CLEAN
550
400
WM
HOUR
MIN.
HR MIN
COOK
TIME
START
TIME
TIMER
ON/OFF
AUTOMATIC OVEN
CLOCK
OVEN CLEANING – MOVE DOOR LATCH TO RIGHT. TURN OVEN KNOB TO "AUTO SELF CLEAN."
1 2 3 4 5 6 7
11
10 9 8