Filter
Top Products
Installation Instructions
8
INSTALLING THE ICEMAKER
REMOVE THE ICE SERVICE RACK
An ice service rack is mounted on knobs secured
with screws in the left side of the freezer wall.
• Remove ice trays and storage bin.
• Carefully slide the ice rack up and off the
mounting knobs.
1
Ice
Service
Rack
• Remove and discard the screws and knobs from
the wall.
REMOVE ELECTRICAL PLUG
AND WATER CONNECTION
COVER
2
Electrical plug
and water
connection cover
• Remove screw (A) that holds the cover in place.
Discard the screw and cover.
• Push in a double prong plug to seal the cover
mounting slot.
A
Cover
mounting
slot
Double
prong plug
INSTALL WATER FILL TUBE
THROUGH THE BACK OF THE
REFRIGERATOR
3
• Remove the cover
for the water tube
inlet hole on the
back of the
refrigerator near
the bottom. Use
a flat-blade
screwdriver
covered with
masking tape to
protect against
scratching the
refrigerator.
• After removing
the cover, use the
screwdriver to
pierce the interior
sealing tape that
covers the hole for
the water
fill tube inlet.
Clear a path for
the water
fill tube.
• From the inside
of the freezer, pull the
water fill tube through
the hole in the back
wall. Be sure to
remove the masking
tape from the end of
the water fill tube to
allow water to flow
into the icemaker.
• From the outside, push
gently on the water fill
tube while twisting it
slightly, until the flange
is firmly sealed inside
the hole on the back of
the refrigerator. Make
sure the water fill tube
is completely sealed.
• To prevent the styrofoam insulation beads from
entering the water fill tube during installation,
temporarily cover the end of the tube with masking
tape. Push the water fill tube through the hole.
Masking
tape
Cover for the
water tube inlet
hole on the back
of the refrigerator
Sealing tape
(remove)
Back
wall
inside
freezer
Electrical connection
Water tube
inlet hole
Back of the
refrigerator
Back
wall
inside
freezer
Water
tube
inlet
hole
Masking
tape
Electrical
connection
Back of the
refrigerator
Sealed water
fill tube
Flange
Water fill tube
Water fill
tube