Filter
Top Products
13
STEP 14 LEVEL THE REFRIGERATOR
Adjust the Rollers
T
he refrigerator can be leveled by adjusting the rollers,
front and rear.
Rollers have three purposes:
• The rollers adjust so that the door closes easily when
opened about halfway. (Raise the front about 5/8"
[16 mm] from the floor.)
• Rollers adjust to allow the refrigerator to be firmly
positioned on the floor and to prevent rocking
when the doors are opened and closed.
• The rollers allow you to move the refrigerator from
the wall for cleaning.
To Adjust the Rollers:
• Use a 3/8" hex socket or wrench to turn
the adjustment screws. Turn the screws clockwise
to raise the refrigerator, turn counterclockwise
to lower it.
• Use a 5/16" hex socket to turn the screws for
the rear rollers. Turn the screws clockwise to raise
the refrigerator, counterclockwise to lower it.
Adjust the Leveling Legs
The leveling legs have two purposes:
• Leveling legs adjust so the refrigerator is firmly
positioned on the floor and does not wobble.
• Leveling legs serve as a stabilizing brake to hold
the refrigerator securely in position during operation
and cleaning. The leveling legs also prevent
the refrigerator from tipping.
Turn the leveling legs clockwise to raise the refrigerator,
counterclockwise to lower it.
w CAUTION: To avoid possible personal
injury or property damage, the leveling legs must be
firmly touching the floor
.
w PRUDENCE : Afin d’éviter toute blessure
corporelle ou dommage matériel, les pieds de support
doivent être en contact avec le sol.
Rear Roller
Adjustment
Screw
Front Roller
Adjustment
Screw
Leveling
Leg
Front Roller
STEP 15 LEVEL THE DOORS
I
f the doors are not evenly aligned at the top,
the refrigerator door can be adjusted.
•
Use a 7/16" hex socket or wrench to turn the door
adjusting screw. Turn the screw to the right to raise
the door, turn left to lower the door.
NOTE: A nylon plug is imbedded in the threads of
the pin. The plug is designed to prevent the pin from
turning. A wrench must be used to turn the pin.
• Turn the wrench one or two times. Open and
close the refrigerator door to check alignment with
the freezer door at the top. Adjust again if necessary.
Raise
Doors Should
Align at Top
Installation Instructions