Filter
Top Products
STEP 6 REMOVE THE TOEKICK
I
f, after removing the freezer drawers and
refrigerator door, the refrigerator will still
not fit through a doorway, the toekick
can be removed.
• Remove the toekick by removing the 2 Phillips
head screws.
STEP 7 MOVE THE REFRIGERATOR
• Place a piece of the carton or soft cloth against
the side panel of the refrigerator to pad and protect
the stainless steel finish.
• Place the refrigerator on the handtruck
with a side
against the truck only.
• Move the refrigerator indoors. Place refrigerator close
to the installation location.
9
REPLACE THE FREEZER BASKET
Replace the top drawer freezer basket.
B. Drive the bottom outside screw into the door
on each side until it is all the way in.
C. Drive the remaining 3 screws on each side
all the way into place (there are a total
of 8 hex-head scr
ews).
Screw
Screws
TOP DRAWER
STEP 8 REPLACE THE FREEZER
DRAWERS
ATTACH AND SECURE THE DRAWER FRONT
TO THE SLIDES
A
.
Pull out the rail assemblies to the f
ull length
on each side of the cabinet.
T
w
o people may be required to complete
this procedure.
STEP 8 REPLACE THE FREEZER
DRAWERS (CONT.)
Installation Instructions