Filter
Top Products
43
1. After selecting the ‘Backlight’ menu item, the tuner will display its list of three menu modes:
‘Inactive’, ‘Active’ and ‘Standby’. These three states are explained below:
• The tuner gets into its ‘inactive’ state when there is no button pressed for 30 seconds.
• The ‘active’ state is when there is user activity.
• ‘Standby’ is the state when the tuner has been turned off.
2. Rotate the Dial to highlight the desired menu mode and press
SELECT.
1. The tuner will now display the current backlight value for this menu mode. You can alter
this value by rotating the Dial to increase or decrease it.
<UPnP>
This menu allows you to change the name of your device. You can name your device any
name you want so other UPnP devices will be able to view the name. Such as Greg’s Kitchen
Tuner etc.
<Wi-Fi Strength>
This menu will show the signal strength of your Wi-Fi access point as it is seen by the internet
tuner. This feature can assist you in locating of your internet tuner for optimal performance.
<Other Cool Stuff>
Please note this manual is for the current shipping version of software (FIRMWARE). We
periodically release new software (FIRMWARE) with new features and move some menu
items around that may reorganize your current menu layout. Please have fun and look around
at all the features, enjoy listening to premium music content, talk tuner, kids programs, music,
NPR, BBC and sports from around the world, and check with us periodically for feature and
content updates.