Filter
Top Products
Page 6
Weekly or Bi-Weekly, Depending on Use (P200 Only):
1) Fill Shuttle with one gallon of hot water.
2) Pour the recommended concentration of urn cleaner into the Shuttle liners (Excessive amounts
of cleaner will attack the stainless steel).
Urn cleaners that have been used successfully:
DIP-IT, manufactured by Economics Laboratories, Inc.
4 Corporate Park Drive
White Plains, NY 10604
OXYLITE, manufactured by Avril, Inc., Syndet Division
601 N. Third Street
Reading, PA 19601
3) Scrub the liner interior with a plastic bristle brush.
4) Remove the knurled nut at the top of the gauge glass and clean the glass with a small
bottle brush.
5) Pour out the contents of the Shuttle.
6) Remove the handle assembly of the Shuttle faucet by unscrewing the plastic bonnet.
7) Gently wash the faucet seat cup with a soft cloth and warm soapy water.
8) Wash the faucet shank with a bottle brush.
9) Clean the warmer and bottom of Shuttle surfaces. These surfaces must be clean for
proper heat transfer.
10) Polish the exterior of the brewer with stainless steel cleaner. Use the appropriate
cleaner for brass, copper, or vinyl if these optional finishes are provided.
P200/RAPS200 Brewers