Filter
Top Products
<%).'&'M(+8dbWdAVi]Z$B^aa
"&*"
TURN OFF and LOCK your master power
switch so no power is available to the lathe/
mill, and make sure the spindle is stopped
before proceeding with any adjustments or
maintenance. Failure to comply may result
in serious personal injury or death.
L]Zc ^aajb^cViZY! i]Z edlZg aVbe Figure 6
^cY^XViZhi]ViedlZg^hWZ^c\hjeea^ZYidi]ZaVi]Z$
b^aa#EgZhh^c\i]ZgZYZbZg\ZcXnhideWjiidcl^aa
Xji edlZg [dg bVX]^cZ deZgVi^dch# Il^hi^c\ i]Z
ZbZg\ZcXn hide Wjiidc XadX`l^hZ VcY aZii^c\ ^i
ededjil^aagZhidgZedlZg[dgbVX]^cZdeZgVi^dch
VcYgZhZii]ZZbZg\ZcXnhideWjiidc#
Note: The Spindle Rotation ON/OFF Lever
(Figure8) on the apron starts the spindle motor
in a particular direction.
Figure 6.EdlZgaVbeVcYZbZg\ZcXnhide
adXVi^dc#
:bZg\ZcXn
Hide7jiidc
EdlZgAVbe
He^cYaZ?d\
7jiidc
Operation Safety
SECTION 4: LATHE OPERATIONS
The Power Supply
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Complete the Test Run & Break-In proce-
dure on Page 16 before using this lathe/mill
for any cutting or threading operations; oth-
erwise, gear box damage will occur.
NOTICE