Filter
Top Products
-4-
H8067 Flat Iron Style Mandolin Kit
The majority of the wood components in this kit
come fully machined and ready for assembly. A
small amount of sanding and finish work is need
-
ed to complete the mandolin.
Recommended Tools & Supplies:
• Wood Glue—Titebond Original Wood Glue
• #80 to #320 Sanding Paper
• Flexible Sanding Block
• “000” Grade Steel Wool
• Clamps or Rubber Strips (made from cut up
inner tubes)
• Electric/Cordless Drill
• Drill Bit (
1
/16")
• Small Brad Nails
• Wire Cutters
• Razor Blades
• Chisel
• Phillips Screwdriver
• Masking Tape
• Lightweight Hammer
• Rubber Dead Blow Hammer
• Steel Straight Edge
• Sharp Pencil
• File Assortment
• Finishing Materials
• Electronic Tuner
• Coat Hanger
• NIOSH Approved Respirator
• ANSI-Approved Safety Glasses
SECTION 3: PARTS INVENTORY
Figure 1. Boxed components.
Figure 2. Additional components.
Supplies/Tools
REF PART # DESCRIPTION QTY
1 PH8067001 Mandolin Body 1
2 PH8067002 Neck 1
3 PH8067003 Fretboard 1
4 PH8067004 Bridge 1
5 PH8067005
Tuning Machines 2
6 PH8067006 Tailpiece 1
7 PH8067007 Nut 1
8 PH8067008 Endpin 1
9 PH8067009 Dowels 2
10 PH8067010 Strings
8
11 PH8067011 Bushings
8
12 PH8067012 #3 x
3
/4" SS Screw 1
13 PH8067013 #1 x
3
/8" SS Screws 14
1
2
3
4
6
7
8
9
10
11
12
13
Inventory
5