Filter
Top Products
-12- H8172 Cement Mixer
Follow the tips below when using the cement
mixer:
• Before using your cement mixer, coat the
inside of the mixing drum with a light layer of
oil. Refer to Lubrication on Page 13 for more
details.
• Spray the inside surface of the cement mixer
with a small amount of water before adding
cement (in addition to the lubrication steps
above). This will make it easier to clean after
operation. Avoid spraying water on the switch
or motor cover!
• The mixer works more effectively and quickly
when batches are half the maximum recom
-
mended mixture load, or if mixture materials
are added slowly (while mixing), rather than
all at one time.
• The maximum recommended mixture load is
3.2 cubic feet. This equates to:
— Six 60 lb. bags
— Four 90 lb. bags
Operation Tips
SECTION 4: OPERATIONS
Damage to your eyes and lungs could result
from using this machine without proper pro
-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri
-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC
-
OMMEND that you read books, trade maga
-
zines, or get formal training before begin
-
ning any projects. Regardless of the con
-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Children can hurt themselves if playing on
this mixer. If this machine is not stored in
a locked facility, always disconnect power
when leaving it unattended.
Do not put hands, shovels, or other tools into
the mixing drum while it is turning, or injury
or equipment damage may occur.