Filter
Top Products
-6- H8172 Cement Mixer
Serious personal injury could occur if you
connect the machine to the power source
before you have completed the set up pro
-
cess. DO NOT connect the machine to the
power source until instructed to do so.
110V Operation
Amperage Draw
The Model H8172 motor draws the following amps
under maximum load:
Motor Draw ..............................................8 Amps
Circuit Recommendations
We recommend connecting your machine to a
dedicated and circuit that is rated for the amper
-
age given below. Never replace a circuit breaker
on an existing circuit with one of higher amper
-
age without consulting a qualified electrician to
ensure compliance with wiring codes
. If you are
unsure about the wiring codes in your area or
you plan to connect your machine to a shared
circuit, consult a qualified electrician.
110V Circuit .............................................15 Amp
Extension Cords
• Use at least a 14 gauge cord that does not
exceed 100 feet in length!
• A qualified electrician MUST size cords over
50 feet long to prevent motor damage.
SECTION 2: CIRCUIT REQUIREMENTS