Filter
Top Products
20. Check that leveling legs “AA” are firmly against the floor.
Close and latch the door, and place level against the
front panel “BB”. Check that dishwasher is plumb.
Adjust leveling leg or add shims under rear wheel until
dishwasher is level.
NOTE:
Shims must be securely attached to floor to
prevent their movement when the dishwasher is
operated.Repeat for other side of dishwasher.
Place level against top front opening of tub “CC”. Check
that dishwasher is level from side to side. If dishwasher
is not level, adjust front legs up or down until
dishwasher is level.
20
Electrical Connection
Check electrical requirements (see page 7).
You need to:
- Have the correct electrical supply and recommended
grounding method.
- Check that power supply is disconnected.
If you are: Use Steps:
Direct Wiring 1-4
Using a Power Supply cord 1a
C. CONNECT DISHWASHER
Water
Drain
Electrical