Filter
Top Products
English
11
PREPARING BEFORE USE
1. Remove all packaging material.
2. Check to make sure all parts and materials are available in the fridge. Consult
the seller for help if you find parts are missing.
3. Place the refrigerator in a good location (See Install Limitations on page 4).
4. Toe grille installation: Open the freezer drawer and remove the basket inside.
Install toe grille with screws from bag.
5. For the convenience of record keeping, the model and serial number,
purchase date, and receipt should be copied and taped to this manual for
safekeeping.
6. It is recommended to clean the refrigerator before use. Before putting food in
the refrigerator, please clean the inside and outside with water and diluted
baking soda. Dip clean cloth in a gallon of water with a spoonful of baking
soda.
7. Position the fridge then plug it in. After the refrigerator is placed on a flat
surface and cleaned, turn on the power then let it run a few hours, then begin
loading it with food.
Initial Usage
1. Plug in the power cord.
2. Change the settings to the temperature desired.
3. Putting the food into the refrigerator: The refrigerator will be cooled completely
after a period of a few hours. After that, frozen and fresh foods can be put
into the refrigerator for normal use.
When changing internal temperatures, a new balance temperature will occur
after a period of time. The length of this period of time depends on the degree of
the temperature change, the ambient temperature, the frequency of door
openings, and the amount of stored food in the fridge.