Haier HB21FC75 Refrigerator User Manual


 
If you have trouble getting the unit into its final location, please follow the below
door removal and installation instructions. For your safety have two or more
people to assist you in completing the below task to avoid bodily injury, product
damage, or property loss.
It is extremely important for the water line connector and tubing on the back
panel to be reattached properly. Failure to do so can result in a leak at the
connection or dripping at the dispenser.
How to Disconnect the Water Line (Only applicable to HB21FC75*)
1) Unplug unit from power source and remove the top hinge cover (5 screws)
and water line cover (1 screw).
2) Disconnect the plastic water line from the connector on the back panel by first
removing the black locking clip on one end of the connector. (Illustration 1)
3) Depress the white end of the union inward while pulling the tubing outward.
Repeat for the other end. (Illustration 2)
4) Pull the water line A out of cabinet from the front of unit as seen in
Illustration 4.
5) To disconnect the electrical wires, push down on the locking tab of the plastic
connectors and gently pull the two ends apart.
English
6
Black Locking
Clip
[Illustration 1]
[Illustration 2]
White End of
the Union
Color Mark
REMOVING AND INSTALLING THE DOORS