Filter
Top Products
9
Cleaning Your Fryer
Burn Hazard.
To avoid eruptions and/or spatter of hot oil, dry all fryer
components thoroughly before using.
w WARNING
2 3
4 5 6
1
Make sure fryer is turned to MIN.
Unplug from wall outlet. Wait
until oil has cooled. This can take
several hours.
Lift control panel up and out of
base. Do not drip oil on base.
Lift oil tank from fryer and pour
out oil. Wipe all excess oil or oil
film from oil tank.
Clean outside of base with hot,
soapy water. Do not immerse
unit in water.
Press OPEN button to release
and open lid. Hold base with one
hand; use other hand to slightly
tilt lid towards the control panel
and pull lid up.
TO REINSERT LID: Place lid on the lid
hinge, making sure the silver spring
lines up with the opening on the back of
the base. Slightly tilt lid towards control
panel; gently press lid down into place.
Do not immerse heating element
assembly in water.
NOTE: To avoid damaging fryer,
use care when cleaning heating
element assembly. Gently wipe
with soft cloth dampened with
hot, soapy water.
840217100 ENv05.indd 9840217100 ENv05.indd 9 4/30/12 11:42 AM4/30/12 11:42 AM