Filter
Top Products
MICROLAB
®
Carousel User Guide (June 2003)
11
Carousel platter
To install the carousel platter:
1. Place the carousel platter on top of the carousel housing
assembly. See figure 10. Align the three holes in the platter with
the threaded holes in the housing assembly.
2. Attach the carousel platter to the carousel housing assembly using three
screws (8372-01), supplied from the index bracket kit, and a 3/32” hex
wrench.
Figure 10: Carousel platter
3. Use an adjustable wrench to adjust the nuts on all the mounting feet
(7419-01), so the carousel platter is level. See figure 11.
Do not rotate the carousel platter by hand.