![](http://pdfasset.owneriq.net/7/b2/7b24648d-c382-4403-9ca6-918666a550c0/7b24648d-c382-4403-9ca6-918666a550c0-bg16.png)
MICROLAB
®
Carousel User Guide (June 2003)
20
Carousel commands
There are two commands associated with the carousel.
• Initialize
Use this command to initialize the carousel.
• Move To Position
This command rotates the carousel around to the position set in the
parameter dialog box (figure 20). The carousel will rotate in the shortest
direction.
Figure 20: Move to Position Parameters window