Filter
Top Products
MICROLAB
®
Carousel User Guide (June 2003)
7
Index bracket platter
kit
The carousel comes with an index bracket kit (8488-01 or -02). The index
bracket is used during calibration.
To install the index bracket to the carousel housing assembly:
1. Mount the index bracket (8322-01 or -02) to the right side of the
carousel housing assembly, using the two screws (8365-01)
supplied from the index bracket kit. See figure 6.
2. Mount the index pointer (8383-01 or 8527-01) on to the index
bracket, using two screws (8375-01) supplied from the index
bracket kit. See figure 6.
Figure 6: 8/10 station carousel index bracket components