Hamilton Electronics 8534-01 Convection Oven User Manual


 
MICROLAB
®
Carousel User Guide (June 2003)
6
3. Secure the carousel base plate brackets (7918-01) to the left and right
sides of the housing assembly, in the desired position (1, 2, or 3), with
the washer and screw shown in figure 5.
4. Align the holes of the brackets to the holes in the ML SWAP base
plate. Using the screws and washers supplied, secure the brackets to
the base plates (see figure 5).
Figure 5: Right and left sides of carousel housing assembly