Filter
Top Products
: Left ‘Burner
urners are different colors.
1. Remove electrical power supplied to the unit.
Remove electrical power supplied to the unit by unplug-
ging the unit, or by turning off the wall circuit breaker,
or electrical shock could result.
2. Using l/4” socket, remove both side panels.
3. Locate the air adjustment behind the control panel on each
side of the unit.
4. Loosen the nuts securing the slide adjustments.
5. Replace power to unit and turn Power Switch to the
“Power” position.
6. While the burners are igniting continously, slide the
adjustment shield open or close until both burners are
orangy-red. (Refer to color chart.)
7. Tighten nuts on adjustment shields and replace side panels.
I
I
1. Remove electrical power supplied to the unit.
Remove electrical power supplied to the unit by unplug-
ging the unit, or by turning off the wall circuit breaker.
Turn off the main gas supply to the fryer and discon-
nect and/or cap the main supply line to the fryer, or
possible explosion could result.
2. Remove the left side panel of the fryer.
3. Using 11/16” wrench loosen fitting on gas line going to
burner, and disconnect gas line.
4. Using a Phillips head screwdriver, remove the two screws
securing the condensation deflector onto the frame and
remove deflector.
5. Using 3/8” socket, remove nuts securing burner and drop
burner off unit.