Model OFG- 390
Problem Cause Correction
SHORTENING FOAMING/DRAINING SECTION
Foaming or boiling • Water in shortening • At end of Cook Cycle,
over of shortening drain shortening and clean
frypot; add fresh shortening
• Improper or bad • Use recommended
shortening shortening
• Improper filtering • Refer to the procedure
covering filtering the
shortening
• Cold zone full of cracklings • Filter shortening
• Improper rinsing after • Clean and neutralize the
cleaning the fryer frypot; rinse with vinegar
to remove the alkaline, then
rinse with hot water and
dry frypot
Shortening will
• Drain valve clogged with • Open valve - push cleaning
not drain from crumbs rod through drain opening
frypot from inside of frypot
• Drain valve will not open by • Replace cotter pins in valve
pulling the handle coupling
Shortening leaking
• Obstruction in drain • Remove obstruction
through drain
valve
• Faulty drain valve • Replace drain valve
1003 1-9