Filter
Top Products
– 18 –
WRITING A COOKING PROGRAM
It is possible to write and store up to 100 cooking
programs with a maximum of 10 phases each.
NOTE: The oven is also equipped to use an optional
HCPC-HACCP recording system to facilitate fast,
easy and accurate data management via wireless
communication to a PC. Contact your local Hobart
representative for more information.
1. Press the Program Button to select program
mode. The button will illuminate to indicate
it has been selected and will display recipe
"00".
2. Use the Plus/Minus Buttons to select
the program number that will identify this
program.
3. Input all cooking phases. The program number
will blink to indicate that it has not been
stored.
4. Press and hold the Program Button. The display
will change and show the available characters
that can be used to name the program.
5. Use the Plus/Minus Buttons to place the
fl ashing cursor over the character to be
used.
6. Press the Enter Button to add the character
to the name. The characters will be added to
the right of the program number on the display
screen.
7. Repeat steps 5 and 6 to add more characters
to the program name.
NOTE: Use the top Selection Line Button next to the
arrow icon to erase a character or to backspace.
8. After the program has been named, press and
hold the Enter Button to store the name with
the program number. The buzzer will sound
and the program number will stop blinking to
indicate that the program has been stored.
NOTE: A program can also be made after a cooking
cycle has been run. Press the Program Button, use
the Plus/Minus Buttons to navigate to a number to
store the program and press the Enter Button. Use
the steps above to name the program.
350
°F
PH
2/2
2
55
01:17
55
PROGRAM
NUMBER
55 EXAMPLE
55
PROGRAM
NUMBER
0 1 2 3 4 5 6 7 8 9 - .
ABCDEFGHIJKLM
NOPQRSTUVWXYZ