Hobart CE6HD ML-138010, CE10HD ML-138012, CE10FD ML-138016, CE20HD ML-138014, CE20FD ML-138018, CE6HD ML-138011, CE10HD ML-138013, CE10FD ML-138017, CE20HD ML-138015, CE20FD ML-138019 Convection Oven User Manual


  Open as PDF
of 24
 
– 19 –
MODIFYING A COOKING PROGRAM
1. Press the Program Button to select program
mode. The button will illuminate to indicate it
has been selected.
2. Use the Plus/Minus Buttons to select the
program to be modifi ed.
3. Modify the desired cooking phases. The
program number will blink to indicate that it
has not been stored.
NOTE: A modifi ed program can be run before storing.
After the program has run, it can then be stored. It
is not possible to insert a phase into a program.
4. Press and hold the Enter Button. The buzzer
will sound and the program number will stop
blinking to indicate that the program has been
stored.
REVIEWING A COOKING PROGRAM
1. Press the Program Button to select program
mode. The button will illuminate to indicate it
has been selected.
2. Use the Plus/Minus Buttons to select the
program number to be reviewed. The screen
will display the fi rst phase of the program.
3. Press the top Selection Line Button to scroll
through the phases of the program.
4. Press the Selection Line Button next to the
temperature icon to view the set temperature
on each phase.
5. Press the START/STOP Button to view total
cooking time for the selected program.
NOTE: The total cooking time for all phases will be
displayed unless one of the phases uses the core
probe or continuous timer mode.
ERASING A COOKING PROGRAM
1. Press the Program Button to select program
mode. The button will illuminate to indicate it
has been selected.
2. Use the Plus/Minus Buttons to select the
program to be erased.
3. Press and hold the Enter Button. The buzzer
will sound and the program will be erased.
350
°F
PH
2/2
2
55
01:17
55
PROGRAM
NUMBER
 previous next