Filter
Top Products
– 13 –
PROGRAMMING BEEP TONE: LOUDNESS
Beep Tone Loudness can have one of the following settings: 3 Loud, 2 Moderate, 1 Soft, 0 Silent.
1. Open the door and leave it open.
2. While pressing START, press POWER LEVEL.
3. The Display has the 1 above
STAGE. Press Memory key
1
the number
of times necessary to obtain the desired LOUDNESS.
• Press Memory key
1
once to select 3 for
Loud
.
• Press Memory key
1
twice to select 2 for
Moderate
.
• Press Memory key
1
three times to select 1 for
Soft
.
• Press Memory key
1
four times to select 0 for
Silent
.
Repeat until the desired degree of loudness is selected.
4. While pressing START, press POWER LEVEL. The LOUDNESS
setting is saved. After 3 seconds the display returns to idle (blank).
PROGRAMMING BEEP TONE: DURATION
Beep Tone Duration can have one of these two settings: 1 Stage displays and represents three short
beeps (3 seconds duration); 2 Stage displays and represents continuous beeps (60 seconds duration).
1. Open the door and leave it open.
2. While pressing START, press POWER LEVEL.
3. The Display shows the 1 above
STAGE. Press Memory key
1
the
number of times necessary to obtain the desired LOUDNESS.
• Press Memory key
1
once to select 3 for
Loud
.
• Press Memory key
1
twice to select 2 for
Moderate
.
• Press Memory key
1
three times to select 1 for
Soft
.
• Press Memory key
1
four times to select 0 for
Silent
.
Repeat until the desired degree of loudness is selected.
4. While pressing START, press POWER LEVEL.
5. Within 3 seconds, press Memory key
1
the number of times necessary
to obtain the desired DURATION.
• Press Memory key
1
once to select 1 above STAGE for three
beeps (3 seconds).
• Press Memory key
1
twice to select 2 above STAGE for continuous
beeps (60 seconds duration).
Repeat until the desired duration is selected.
6. While pressing START, press POWER LEVEL. The LOUDNESS
and DURATION settings are saved. After 3 seconds the display
returns to [ 0 ].
STAGE
1
STAGE
PROG
1
PROG
STAGE
1
PROG
STAGE
2
PROG
STAGE
2
PROG