Filter
Top Products
– 16 –
MAINTENANCE
REPLACING THE CAVITY LIGHT BULB
If the Cavity Light Bulb burns out, you can replace it yourself.
WARNING: UNPLUG ELECTRICAL POWER CORD BEFORE
PERFORMING ANY CLEANING OR MAINTENANCE.
• Unscrew the screw on the Cavity Light Cover located on the left
side of the cabinet (Fig. 7).
• Replace the old bulb with a new 115 – 125 V, 20 W bulb. Use same
size and type.
• Replace the Cavity Light Cover (turn screw until snug).
TROUBLESHOOTING
SERVICE
Contact your local Hobart-authorized service office for any repairs or adjustments needed on this
equipment. Service contracts are available on this and other Hobart products.
FORM 34726 (Nov. 2001) PRINTED IN U.S.A.
CAVITY LIGHT COVER
Fig. 7
SEDOCERULIAFESUACELBISSOPNOITCADETSEGGUS
10F
.doofdekoocrevO
ooterutarepmetriatsuahxE
.hgih
loocotnevoroftiaW.peebpotsotnevogulpnU
.roodnepotonod,setingidooffI.teserdna
tcatnoc,emusertonseodnoitarepolamronfI
.rebmunedoCeruliaFehttroperdnaecivres
,44F,43F,33F,50F
78F,68F,28F,18F
.tiucrichtiwmelborP
.tcennoceR.etunim1tsaeltatiaW.gulpnU
tcatnoc,emusertonseodnoitarepolamronfI
.rebmunedoCeruliaFehttroperdnaecivres
ETON .seruliafelbissopehtllaetacidnitonodsedocevobaehT: