Filter
Top Products
– 14 –
DELIMING MODEL SR24H (HOT WATER SANITIZING MODEL)
Delime as follows:
1. Remove rack from machine.
2. Close the door.
3. Allow machine to fill for 10 to 15 seconds.
4. Partially open the door and wait 5 seconds.
5. Open door; add deliming agent (carefully follow supplier's instructions).
NOTE: The sump holds 1.4 gallons of water.
6. Close the door and allow the machine to complete the wash/rinse cycle.
7. Inspect the interior of the machine for lime deposits. Repeat steps 2 through 6 if
necessary.
Caution: Do not allow the deliming agent to remain in the machine longer than recommended
by the deliming agent manufacturer. After deliming, the machine should be run through
two cyles with no dishes to rinse and flush the machine interior.
LUBRICATION
The motor has grease-packed ball bearings and, therefore, requires no lubrication.