Filter
Top Products
– 3 –
Installation, Operation and Care of
MODEL SR24 SERIES DISHWASHERS
SAVE THESE INSTRUCTIONS
GENERAL
The SR24 Series Dishwashers are fully automatic, front-loading machines that are equipped with
a
1
/2 H.P. electric motor.
Standard equipment includes two standard 20" x 20" racks, dial thermometers for both rinse and
wash cycles, synchronous timer, pilot light and lower front trim panel. An over temperature light
is standard on model SR24H only. Side and top panel kits are available should a free-standing
model be desired.
The model SR24H features a built-in booster heater, while the SR24C is a low-temperature,
chemical-sanitizing model for use with 6.0% sodium hypochlorite solution (bleach) as a sanitizing
agent. If 8.4% bleach is to be used, contact Hobart service to change the sanitizer pump settings
(charges will apply).
A chemical sensing module is an available option; it indicates when chemical supplies must be
replenished.
Chemical dispensing pump(s), up to three, are available options at time of order.
INSTALLATION
UNPACKING
Immediately after unpacking the dishwasher, check for possible shipping damage. If this
machine is found to be damaged after unpacking, save the packaging material and contact the
carrier within 15 days of delivery.
PANEL ASSEMBLY
If optional panel kits are to be installed, they must be installed before positioning the dishwasher.
Refer to installation instructions (F-33163) supplied with panel kit.