Hoshizaki 73168 Refrigerator User Manual


  Open as PDF
of 66
 
56
2. Condenser Fan Motor
1)Openthefrontpanel.Movethepowerswitchtothe"OFF"position,thenunplugthe
unit.
2) Remove the left side panel.
3) Disconnect the fan motor wires.
4) Remove the condenser fan motor assembly bolts, then remove the condenser fan
motor assembly. See Fig. 10.
5) Remove the fan motor from the fan motor bracket and remove the fan blade from the
fan motor.
6) Place the fan blade on the new fan motor, then install the new fan motor.
7) Replace the fan motor assembly in its correct position.
8) Connect the fan motor wires.
9) Replace the panels in their correct positions.
10)Plugintheunit,thenmovethepowerswitchtothe"ON"positiontostarttheunit's
cooling process.
Condenser Fan
Motor Bracket
Condenser Fan Motor
Condenser Fan Blade
Condenser
Fig. 10
3. Rail Fan Motor
1)Openthefrontpanel.Movethepowerswitchtothe"OFF"position,thenunplugthe
unit.
2) Remove the storage pans from the rail area. If wet, dry the rail area with a dry cloth.
3) Remove the rail fan motor shroud. See Fig. 11.
4)Disconnecttherailfanmotorleadwiresatleast6"(15cm)fromthefanmotor.Remove
the rail fan motor and bracket.
5) Remove the rail fan motor bracket from the old rail fan motor and place on the new rail
fan motor.
6) Secure the new fan motor wires to the old fan motor wires in the rail area. DO NOT cut
the new fan motor wires.
 previous next