Filter
Top Products
33
C. Preparing the Icemaker for Long Storage
CAUTION
When storing the icemaker for an extended time or in sub-freezing
temperatures, follow the instructions below to prevent damage.
When the icemaker is not used for two or three days under normal conditions,
itissufficienttomovethepowerswitchtothe"OFF"position.Whenstoring
the icemaker for an extended time or in sub-freezing temperatures, follow the
instructions below.
1)Movethepowerswitchtothe"OFF"position,thenunplugtheunitfromtheelectrical
outlet.
2) Close the water supply line shut-off valve.
3) While maintaining a hold on the door, remove the hinge stop pin from hinge (B). Pull out
the bottom of the door slightly, then gently remove the door from hinge (A). See Fig. 31.
4) Remove the 2 screws securing the top panel, then lift it off.
5) Remove all ice from the storage bin.
6) Remove the screws securing the upper rear panel, then remove it.
7) Remove the clamp securing the drain plug, then lower the drain hose into a container.
See Fig. 32. Remove the drain plug to drain the water from the reservoir and evaporator
assembly.
8) After all of the water has drained, replace the drain hose, drain plug, drain clamp and all
other removed parts in their original and correct positions.
9) Open the water supply line drain valve.
10) From the water supply line drain valve, blow the water supply line out using compressed
air or carbon dioxide.
11) Close the water supply line drain valve.
12) Clean the storage bin by using a neutral cleaner. Rinse thoroughly after cleaning.