Hoshizaki C-100BAF-DS Ice Maker User Manual


  Open as PDF
of 34
 
27
III. Cleaning and Maintenance
This icemaker must be cleaned and maintained in accordance with the instruction
manual and labels provided with the icemaker. Consult with your local distributor
about cleaning and maintenance service. To obtain the name and phone number of
your local distributor, visit www.hoshizaki.com or call Hoshizaki Technical Support at
1-800-233-1940 in the USA.
WARNING
1. Only qualied service technicians should attempt to service this icemaker.
2. CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews
are securely in place after any cleaning or maintenance is done to the unit.
Make sure that none have fallen into the storage bin.
3. The storage bin is for ice use only. Do not store anything else in the storage
bin.
4. Keep the area around the icemaker clean. Dirt, dust, or insects in the unit
could cause electrical damage to the equipment or harm to individuals.
5. Do not place ngers or any other objects into the ice discharge opening.
A. Cleaning and Sanitizing Instructions
Hoshizaki recommends cleaning and sanitizing this unit at least twice a year. More
frequent cleaning and sanitizing, however, may be required in some existing water
conditions.
WARNING
1. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
2. Carefully follow any instructions provided with the bottles of cleaning and
sanitizing solution.
3. Always wear liquid-proof gloves and goggles to prevent the cleaning and
sanitizing solutions from coming into contact with skin or eyes.
4. Do not use ice made from the cleaning and sanitizing solutions. After
cleaning and sanitizing, be careful not to leave any solution in the icemaker.
1. Cleaning Solution
IMPORTANT
For safety and maximum effectiveness, use the solution immediately after
dilution.
Dilute1.6.oz.(47mlor3.2tbs)ofHoshizaki"ScaleAway"with1qt(1l)ofwarmwater.
This is a minimum amount. Make more solution if necessary.
2. Cleaning Procedure
1)Movethepowerswitchtothe"OFF"position,thenunplugtheunitfromtheelectrical
outlet.
2) Close the water supply line shut-off valve.
 previous next