Filter
Top Products
36
11. Removal and Replacement of Storage Bin Assembly
1) Move the ice making switch to the “FLUSH” position.
2) Press the push button to dispense ice and remove all ice from the storage bin.
3) Turn off the power supply and unplug the dispenser.
4) Remove the panels.
5) Remove the storage bin cover.
6) Remove the agitator, drip ring, drip plate and shutter assembly.
7) Remove the three socket head cap screws and lift off the storage bin assembly.
8) Install the new storage bin assembly.
9) Assemble the removed parts in the reverse order of which they were removed.
10) Plug in the dispenser and turn on the power supply.
11) Move the shutter to check for proper operation.
12) Move the ice making switch to the “ON” position.