Filter
Top Products
37
12. Removal and Replacement of Agitator and Drip Ring
1) Move the ice making switch to the “OFF” position.
2) Press the push button to dispense ice and remove all ice from the storage bin.
3) Turn off the power supply, and unplug the dispenser.
4) Remove the top panel.
5) Remove the storage bin cover.
6) Rotate the agitator counterclockwise and lift off.
7) Rotate the drip ring about 30 degrees clockwise and lift off.
8) Install the new drip ring and agitator.
9) Assemble the removed parts in the reverse order of which they were removed.
10) Plug in the dispenser and turn on the power supply.
11) Move the ice making Switch to the “ON” position.