Filter
Top Products
24
1) Ice block or bridge
1) Deformed due to ice block
or bridge.
1) Coil winding opened.
1) Bad contacts.
1) Bad contacts.
1) Clogged Filter.
1) Bad contacts.
1) Faulty adjustment.
1) Contacts fused.
REMEDY
3. FAULTY DISPENSER
[1] No ice is
dispensed.
[2] No water is
dispensed.
[3] Ice keeps
being dis-
pensed.
a) Storage Bin
b) Agitator
c) Solenoid
d) Ice Switch or Dis-
pensing Switch
e) Ice Dispensing
Relay
a) Water Valve (Dis-
pensing)
b) Water Dispensing
Switch
a) Shutter
b) Ice Switch
Dispensing Switch
PROBLEM POSSIBLE CAUSE
1) Remove all ice from
Storage Bin when not
using ice dispenser for a
long time.
1) Replace.
1) Replace.
1) Check for continuity and
replace.
1) Check for continuity and
replace.
1) Clean.
1) Check for continuity and
replace.
1) With Shutter closed, lock
Shutter in place by
securing with two screws
at the lower part of
Solenoid and two screws
under Solenoid.
1) Replace.