Hoshizaki KM-151BAH Ice Maker User Manual


 
14
III. Cleaning and Maintenance Instructions
IMPORTANT
Ensure all components, fasteners and screws are securely in place after any
maintenance or cleaning is done to the equipment.
A. Cleaning
WARNING
1. Hoshizaki recommends cleaning this unit at least once a year. More
frequent cleaning, however, may be required in some existing water
conditions.
2. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
3. Always wear liquid-proof gloves to prevent the cleaning and sanitizing
solutions from coming into contact with skin.
4. For safety and maximum effectiveness, use cleaning and sanitizing
solutions immediately after dilution.
1. Cleaning Procedure
1) Dilute 5 fl. oz. (148 ml) of recommended cleaner Hoshizaki “Scale Away” or “LIME-A-
WAY” (Economics Laboratory, Inc.) with 1 gallon (3.8 lit.) of water.
2) Remove the Air Filter. Remove all ice from the Evaporator and the Storage Bin.
Note: To remove cubes on the Evaporator, move the Control Switch on the Control Box
to the “OFF” position and move it back to the “ICE” position after 3 minutes. The
defrost cycle starts and the cubes will be removed from the Evaporator.
3) Move the Control Switch to the “OFF” position. Open the Door.
4) Disconnect the Silicone Hose to drain the water. See Fig. 6. Reconnect the Silicone
Hose back in its correct position after all of the water has drained.
5) Pour the cleaning solution into the Water Tank. Move the Control Switch to the “WASH”
position. Close the Door.
6) After 30 minutes, move the Control Switch to the “OFF” position.