Hotpoint EH10 Electric Pressure Cooker User Manual


 
Care and Cleaning
16
Turn off the main switch before cleaning. Before switching on
again, ensure that all controls are in the off position.
Never use biological washing powder, harsh abrasives,
scouring pads, aerosol cleaners or oven chemical cleaners of
any kind.
Wipe over the control panel with a damp cloth and polish with a dry
cloth. Do not use oven cleaners or aerosols, scouring pads or
abrasive powder for cleaning the glass or plastic knobs as damage
will occur.
Lift out the hotplate bezels and wash in hot soapy or detergent
water. Clean hob surround with a cloth wrung out in soapy
water. Stubborn stains can be removed with a cream, paste or
liquid cleaner, or by gently rubbing with liberally soaped, very
fine steel wool pads. Check that the cleaning agent used is
approved by the Vitreous Enamel Development Council.
Raise the hob and secure in this position with the stay provided
Clean with a cloth wrung out in soapy water. Stubborn stains can
be removed with a cream, paste or liquid cleaner, or by gently
rubbing with liberally soaped, very fine steel wool pads. Check
that the cleaning agent used is approved by the Vitreous
Enamel Development Council.
Wipe over the door outer panels with a cloth wrung out in hot
soapy water, then after wiping with a cloth wrung out in clear
water, dry with a soft clean cloth. Do not use scouring pads or
abrasive powder which may scratch the surface. Clean the door
inner panels with a cloth wrung out in soapy water. Stubborn
stains can be removed with a cream, paste or liquid cleaner, or by
gently rubbing with liberally soaped, very fine steel wool pads.
Check that the cleaning agent used is approved by the
Vitreous Enamel Development Council.
Warning
Control panel
Vitreous Enamel
Hob Surround
Spillage
Compartment
Oven and Grill
Doors