Hotpoint EH10 Electric Pressure Cooker User Manual


 
10.7kW
1.0kW
48kg
Height 1240mm Width 500mm
Depth 600mm
29 litres
900cm
2
1.65kW
1.0kW
1.65kW
Installation
The cooker is designed to fit between kitchen
cabinets spaced 500mm apart. The space either side
need only be sufficient to allow withdrawal of the cooker
for servicing. It can be used with cabinets one side or
both as well as in a corner setting. It can also be used
free-standing.
This cooker is a class X appliance, as such adjacent
side walls which project above hob level, must not be
nearer to the cooker than 150mm and should be
protected by heat resistant material. Any overhanging
surface or cooker hood should not be nearer 650mm.
Before moving your cooker, switch off at the cooker
control unit, ensure that it is cool.
Open the grill door sufficiently to allow a comfortable
grip on the underside front edge of the oven roof,
avoiding any grill elements.
Take care in moving the cooker as it is heavy. Take
care to ensure that any floor covering is not
damaged.
4
Siting the Cooker
Moving the Cooker
Note
Product Specification
Supply Voltage 230V AC Only 240V AC Only
Supply Frequency 50Hz 50Hz
Total Wattage 9.9kW
Grill Wattage 2.3kW 2.5kW
2.2kWMain Oven Wattage 2.4kW
Left Front Hotplate 1.8kW
Left Rear Hotplate 1.1kW
Right Rear Hotplate 1.8kW
Right Front Hotplate 1.1kW
Grilling Area
Top Oven Capacity
49.9 litresMain Oven Capacity
Weight
External Dimensions
Excluding Handles