Filter
Top Products
6GB
MOTOR CONNECTION
• There are two types of motor connections where
the main difference is the diameter of the steam
and odour outlet:
- 120mm diameter
- 150mm diameter
• If the motor connection (N, Fig.1) does not come
already fitted, it should be fastened to the top
of the hood using screws provided. Then connect
it to the steam and odour exhaust duct by means
of a pipe of a suitable diameter.
INSTALLATION
CHIMNEY DUCT ASSEMBLY
• Take the two chimney ducts A and B (Fig.5)
and rest the lower part of duct A on top of the
hood.
• Fasten duct A to the hood using screws K
(Fig.3), provided.
• Raise the mobile part B until it reaches the
ceiling, making sure it is perpendicular with the
hood.
• Fasten it with the screws M (Fig.5), provided.
Fig.5
Fig.4