Filter
Top Products
GB
10
Using the appliance
First use
Connect the appliance to the water system and
power supply (refer to the Installation manual).
When connecting the appliance to the power supply,
the display will show the temperatures preset by the
manufacturer.
Note: Reaching the preset temperatures requires a
variable amount of time. This time depends on several
factors (times the door is open, amount of food stored,
ambient temperature). Average time is between 2
to 3 hours.
Guide to selecting functions
Freezer temperature
The factory-set ideal temperature is -18°C.
As soon as the freezer compartment reaches the
required temperature, it is automatically displayed. To
change the temperature, press the button until the
display shows the temperature required .
Refrigerator temperature
The factory-set ideal temperature is +5°C.
To change the temperature, press the button until
reaching the temperature required.
Ice mode
This function enables to select the type of ice desired:
crushed ice or ice cubes . For further information
refer to the section “Using the ice and water
dispenser” section.