Filter
Top Products
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fitted with a BS
1363A 13amp fused plug, to change a fuse in this
type of plug use an A.S.T.A. approved fuse to BS 1362
type and proceed as follows:
1. Remove the fuse
cover (A) and fuse (B).
2. Fit replacement 13A
fuse into fuse cover.
3. Refit both into plug.
Important:
The fuse cover must be refitted when changing a fuse
and if the fuse cover is lost the plug must not be used
until a correct replacement is fitted.
Correct replacement are identified by the colour insert
or the colour embossed in words on the base of the
plug.
Replacement fuse covers are available from your local
electrical store.
For the Republic of Ireland only
The information given in respect of Great Britain will
frequently apply, but a third type of plug and socket is
also used, the 2-pin, side earth type.
Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet,
please contact KitchenAid Service for further
instruction. Please do not attempt to change plug
yourself. This procedure needs to be carried out by a
qualified technician in compliance with the
manufactures instructions and current standard safety
regulations.
GB
20
Electrical connection for Great
Britain and Ireland only