Filter
Top Products
Installation ICEU060
Page 3
Location:
Prior consideration for the location of the ice machine shall include:
Installation location to be indoors with a minimum room temperature of 50°F and with a maximum
room temperature of 100°F.
The incoming water temperature to the machine should be between 40°F and 100°F.
Service Access. Allow enough space at the rear of the cabinet for the utility connections. Allow
enough space for the machine to be pulled out from its installed location. Do not build a floor in
front of the machine that would prevent its removal.
Air Circulation. The front panel must remain unobstructed. Do not block the front panel area with
any type of door or curtain. The air intake is on the right hand side of the front panel, and the
exhaust is on the left side of the front panel and the cabinet left hand side panel. If the unit in
installed in a “built-in” cabinet, position the machine so that the left side of the unit is tight against
the cabinet.