Filter
Top Products
Ice Frost Operator’s Manual
Publication Number: M620919596OPR - 12 - © 2004-2006, IMI Cornelius Inc.
QUARTERLY CLEANING AND SANITATION
POST MIX SYSTEMS OPERATIONS
ATTENTION: The cleaning operations must be performed with the machine disconnected from the
power supply.
1. Empty the bowl of any remaining product and switch off the main switch “M”.
2. Remove the cover (B) - FIGURE 27.
3. Extract the quick couplings (C2) / (F2) - (FIGURE 12, FIGURE 13, and FIGURE 14).
Pre-mix version
FIGURE 12
Post-mix version
FIGURE 13
FIGURE 14
4. Disconnect the probe fastenings (D2) / (E2) - (FIGURE 12 and FIGURE 13).
5. Pull the lockpin/safety pin (Y) upwards - FIGURE 15.
CAUTION: There is a spring below the safety pin. Take
caution when removing the pin that the spring does not fall
into the unit or eject the pin.
FIGURE 15