Filter
Top Products
REQUIREDADJUSTMENTSATTIMEOFINSTALLATION
The installation of this appliance must conform with local codes, or in the absence of local codes, with
the latest edition of the National Fuel Gas Code ANSI Z223.1 USA or current CAN/CGA-B149 Installation
Code.
--'--I Thisrangewas manufactured for usewith NaturalGas. IfLP gas isthe fuel ofchoice, follow the conversionto LP procedure found in the installation instructions.
Test all external connectionsfor gas leaks. Never test for gas leaks with an open flame.
Test all electrical connections.
_ Adjust all airshutters for proper flame.
F-"-_ Adjust all valves for low flame settings.
['-_ Test the ventilation system for proper installation.
If a problem exists with the downdraft system, check the ducting installation to make sure it conformstothe Jenn-Air specifications. Most downdraft system problems are attributed to poor ducting practices.
[_ Contact your installer ifthe ventilation system will not removesmoke or cookingfumes from well trimmed
cuts of meat.
-] If ventilation problems persist contact your authorized Jenn-Air Service Contractor.
11