Filter
Top Products
Controls at a Glance
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Drying (select models) Setting the Timer
Use todry or dehydrate foods suchas fruits, vegetables and Use to set and then signal the completion of atime period up
herbs, to 99 hours and 59 minutes (99:59).
1. Press Drying pad. The timer can be used independently of any other oven
2. Press Preset (0) pad for 140°F or the appropriate number activity and can be set while another oven function is operat-
pads for the drying temperature desired, ing. The timer does not control the oven.
1. Press Timer pad.
See page 13-14 for additional information.
• The indicator word TIMER will flash and "0HR:00"
appears in the display.
Cook Time/Stop Time
2. Press the appropriatenumber padsuntil the desired num-
Use to program the oven to start and stop automatically, ber of minutes or hours and minutes appear in the display.
1. Press Bake or Conveet Bake pad. Press the appropriate
number pads for desired temperature. Example: To set theTimer for 5 minutes, press the Timer
pad and the number 5 pad. The control will begin count-
2. Press Cook Time pad. Press the appropriate number pads down after a four second delay.
to enter cooking time in hours and minutes.
3. To delay the start of cooking, press Stop Time pad. Press
the appropriate number pads toenter the time you want the
oven to stop.
See page 12-13 for additional information.
Example: To set the Timer for 1 hour and 30 minutes,
press the Timer pad and the numbers 1,3,0 pads. The
Setting the Clock control will begin countdown after a four second delay.
1. Press Clock pad.
t The indicator word TIME will flash in the display.
2. Press the appropriate number pads until the correct time of
day appears in the display.
When electrical power is supplied or after a power interrup- 3. The last minute of the countdown will be displayed as
tion, the last clock time, before power was interrupted, will seconds.
flash.
4. At the end of the time set, the timer will beep and "End"
To recall the time of day when another time function is will appear in the display. To change the number of timer
showing, press the Clock pad. reminder signals, see page 6.
Clock time cannot be changed when the oven has been
programmed for clock controlled cooking, self-clean or To cancel:
delayed self-clean. 1. Press and hold Timer pad for several seconds. The time
of day will reappear.
OR
2. Press the Timer pad and the "0" number pad. After a
slight delay the time of day will reappear.
NOTE: Pressing Stop pad to cancel the timer will
cancel ALL selected oven functions except the timer.