Jenn-Air SCE4320 Range User Manual


 
Radiant Element Cooktop
(Model SCE4340)
Cooking Procedures
BEFORE FIRST USE. CLEAN COOKTOP (See pg.39)
For best results, always use recommended cookware.
Differentcookpots and differentamountsof food beingprepared willinfluence the
control settings needed forbest results. Forfastest cooking, startwiththesurface
control on Hi for one minute; then turn the control to the lower desired setting.
Covering pans,whenever possible, speeds cooking and ismore energy efficient.
The glass ceramic cooking area retainsheat for aperiod oftime after theelements
havebeen turned off. Put this retained heatto good use. Turn the elements off
a few minutes before food is completely cooked and use the retained heat to
completethe cooking. Becauseofthis heatretentioncharacteristic, theelements
will not respond to changes in heat settings as quickly as coil elements. In the
event of a potential boil over, remove the cookpot from the cooking area.
When preparing foods which can be easily scorched or over-cooked, start
cooking at a lower temperature setting and gradually increase temperature as
needed.
A higher setting than normal may be necessary when using cookpots made with
material that is slow to conduct heat, such as cast iron.
A lowersetting can beusedwhen cookingsmall quantities of foods orwhen using
a cookpot that conducts heat quickly.
IMPORTANT
Do not use wire trivets, fire rings, padsor any such item between the cookware
and the element.
Do not cook foods directly on cooktop.
Do not allow pan to boil dry as this could damage the cooktop and the pan
Do not slide heavy metal or glass cookpots across surface since these may
scratch the surface.
Do not use or place plastic items anywhere on cooktop.
Hot Indicator Light
A red lightwill come on to indicate that cooking area is hot and will remain on until area
hascooled.
13